We are Manufacturer, Supplier, Exporter of Rockwell Hardness Testers, Mechanical Rockwell Hardness Testers / Analog Rockwell Hardness Testers and our setup is situated in Kolhapur, Maharashtra, India.



Features

Rockwell, Rockwell Brinell Combined, Rockwell/Rockwell Superficial Combined System Hardness Testers.

ARUN Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc.

These testers strictly confirms to IS : 1586-2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 -2005, ASTM : E 10 for Brinell test.


Model RAS : Model RAB-1 Model TWIN
Automatic load selection with automatic zero 
setting dial gauge.
Automatic load selection & automatic zero setting dial gauge. Facility for Brinell tests with 187.5 kgf. Load with 2.5 mm Ball indicator, additional load 
250 kgf. With 5mm Ball indentor for testing 
hardness of non- ferrous metals.
Automatic load selection with automatic zero 
setting dial gauge.
Manual operation.   Manual operation.
    Diamond holder is guided in a ball cage, which enables testing of small pins having dia. Less 
than 6 mm (up to 3mm dia.)
Model RASM (Motorized) : Model RAB 250  
Similar to 'RAS' but motorized model. 
Semiautomatic operation for production testing. Drive motor single phase 230 V 50 Cycles.
Similar to 'RAB-1' but of bigger capacity. Diamond holder is guided in a ball cage, which enables testing of small pins having dia less than 6 mm 
( up to 3 mm dia.)
 

Standard Accessories


Model RAS /RASM RAB-1 RAB-250 TWIN
Testing table 50mm dia 1 pc. 1 pc. 1 pc.
Testing Table 38mm dia with 'V groove for round jobs 6 to 45mm dia. 1 pc. 1 pc. 1 pc.
Diamond Indentor 120° 1 pc. 1 pc. 1pc.
Stell ball Indentor 1/16" 1 pc. 1 pc. 1 pc.
Test Block Rockwell 'C 1 pc. 1 pc. 1 pc.
Test Block Rockwell 'B' 1 pc. 1 pc. 1 pc.
Test Block Rockwell Superficial 'N' Nil Nil 1 pc.
Allen Spanners 5 pcs 5 pcs 5 pcs
Clamping Device 1 pc. 1 pc. 1 pc.
Dash Pot Oil 1 Bottle 1 Bottle 1 Bottle
Rubber bellow for elevating screw protection 1 pc. 1 pc. 1pc.
Instruction Manual 1 Book 1 Book 1 Book
Brinell Microscope Nil 1 pc. Nil
Stell Ball Indentor 2.5mm Nil 1 pc. Nil
Test Block HB 2.5/187.5 Nil 1 pc. Nil
Stell Ball Indentor 5mm ' Nil 1 'pc. -. Nil

Technical Data


Model Unit RAS RASM RAB-1 RAB-250 TWIN
Loads kgf. 60, 100 150 60, 100 150 60, 100, 150, 187.5, 250 60, 100, 150, 187.5, 250 15, 30, 45 (Rockwell Superficial) 60,100,150 (Rockwell)
Initial Load kgf. 10 10 10 10 3 (Rockwell Superficial) 10 (Rockwell)
Max. Test Height mm. 230 230 230 330 330
Depth of Throat mm. 133 133 133 150 150
Max. depth ot elevating screw below base mm. 240 240 240 355 355
Size of base (approx.) mm 170x430 170x430 170x430 210x474 210x474
Machine Height (approx.) mm 655 655 655 850 850
Nett Weight (approx.) kg. 65 65 65 100 100

Loads & Indentors for 'ARUN' Hardness Testers for Rockwell & Brinell Tests.


Total load in kgf. (Initial load 10 kgf.) 60 100 150 187.5 250
Indentor Diamond 120° Ball 1/16" Ø Diamond 120° Ball 2.5 mm  Ø Ball 5mm
Test Scales Rockwell A Rockwell B Rockwell C Brinell,F/D2=30 Brinell, F/D2 =10
Suitable for Tests on case hardened stell Annealed, Ferrous & non ferrous metals Annealed, hardened & tempered deep case hardened steel Annealed steel & cast irons Copper, Copper alloys & Al. alloys

Use of combinations of 60, 100 & 150 kgf. loads against Diamond Indentor and 1/16" stell ball indentor permit carrying out tests on Rockwell D, F & G scales. By use of 1/18", 1/4" & 1/2" dia. ball indentors in combinations of 60, 100 & 150kgf. loads, tests can be carried out on Rockwell E, H, K, L, M, P, R, S & V scales also.

hardness-testers-chart