We are Manufacturer, Supplier, Exporter of Electronic Torsion Testing Machines / Digital Torsion Testing Machines and our setup is situated in Kolhapur, Maharashtra, India.

Features

  • Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by torque transducer system.
  • Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque angle of twist.
  • The accuracy of torque indication is ± 1% of the true torque.

The electronic control panel is built using 8085 microprocessor which incorporates state of the art technology with following features

  • Front Panel membrane type key board for test setup.
  • 7 segment digital display of load displacement/extension.
  • Printer port interface.
  • Serial port communication with PC.
  • Storage of important parameters such as peak load & maximum displacement after test.
  • Preload selection to take care of initial slippage.
  • Optional real time graph & PC software.

Technical Data


Models Unit TTE-6 TTE-10 TTE-20 TTE-50 TTE-100 TTE-200 TTE-300 TTE-600
 Max. Torque Capacity Nm 60 100 200 500 1000 2000 3000 6000
Least Count Nm 0.006 0.01 0.02 0.05 0.01 0.02 0.03 0.06
 Torsion Speed RPM 1.5 1.5 1.5 0.5 0.5 0.5 0.5 0.5
 Clearance between Grips mm 0-420 0-420 0-420 0-500 0-600 0-1000 0-1000 0-1500
 Grips for Round specimens mm 4-8
8-12
4-8
8-12
7-10 
10-15
15-20
10-17
17-24
24-30
10-18
18-26
26-34
20-30
30-40
40-50
30-40
40-50
50-60
40-50
50-60
60-70
 Grips for flat Specimens width mm mm 1-5
25
2-8
25
3-10
30
5-12
40
5-15
50
10-20
60
15-25
60
25-40
70
 Motor (400-440 V, 3 Phase & 50 Hz.) HP 0.5 0.5 0.5 0.5 1.0 1.0 1.5 3.0

  • Machines up to 25000 Nm. Capacity will be available on special enquiry.
  • ARUN reserves the right of change in above specification due to constant improvements in design.